Laminate flooring is often referred to as “glued”, but this is a misnomer. The boards are not attached to the subfloor, but to each other. You can usually pry this stuff up by hand unless the glue oozes out and sticks to the concrete or wood underneath. This is very annoying. It’s noisy. But it is possible.
It would be a problem if the glue did seep down. You need to melt the glue or rent heavy equipment. We will detail the two main installation types and how to remove them.
Зміст
Removing Glued-Down Laminate
This method is suitable for floors where the boards are glued to each other and possibly to the subfloor.
Option 1: Manual Method
This is a cheap route. It requires tools, sweat and patience.
1. Break the seal. Take a skill saw (available for rent) and cut the center of each board. This breaks the adhesive connection between the boards.
2. Loosen the edges. Use a chisel and hammer on the underside of the board. Work from start to finish.
3. Lever it out. Remove the planks.
4. **Scrape off the residue. ** Pull up the rest by hand with a floor scraper. This requires a lot of effort. Your back hates you.
Option 2: Heat and Force
If you don’t lift it by hand, the glue will stick.
* Heat gun method: You need a contractor here. They used a heat gun to melt the glue under the board as they pulled it up. Do-it-yourself without experience is dangerous. One slip can damage the subfloor.
* Motorized Floor Stripper: Rent a machine with claws. It rips the planks up quickly. It’s expensive. The laminate is completely ruined. You cannot reuse these planks.
Why hire a professional?
If the glue is industrial, you can cause further damage if you try to remove it yourself. You may also need a professional to repair the subfloor later. It’s another job.
Removing Floating Laminate
Floating floors are different. They fit together like a puzzle. Their edges are sealed with a rubberized seam sealant. The glue never touches the subfloor.
It’s easier to remove.
1. Dissolve the sealant. ** Use a heat gun in the seams.
2. Pull the planks.** When the seal has softened, the planks come apart easily.
Safety First
Dust mask. ** Laminate dust is fine and widespread. Eye protection. The chisel slips. Saw blades kick.
**Knee pads. ** You will be on the floor for several hours.
Final thoughts
Let’s start by checking the type of floor material. Is it glued or floating? Based on this answer, the removal strategy changes completely. If you guess wrong, you’re wasting your time and money.
After completion, the subfloor is likely scarred Fill the holes. Sand the edges. Be prepared for what happens next. Maybe tiles. Maybe carpet. Or maybe you just want it to go away.